Wago Engineering
X 关闭

Wago Engineering

我们的服务

重点污水处理解决方案

为市政、工业及特种应用场景提供工程化设计系统，处理规模覆盖每天 300–2,000 立方米，确保稳定可靠的处理能力。

市政污水处理系统

了解更多

核电站废水处理系统

了解更多

垃圾填埋场废水处理系统

了解更多

半导体行业废水处理系统

了解更多

家禽养殖污水处理系统

了解更多

工业高盐废水处理系统 日处理能力：

了解更多

我们的服务

重点污水处理解决方案

为市政、工业及特种应用场景提供工程化设计系统，处理规模覆盖每天 300–2,000 立方米，确保稳定可靠的处理能力。

Municipal Sewage Treatment System 市政污水处理系统

市政污水处理系统

日处理能力

300 立方米/天

处理工艺流程：

粗格栅 → 调节池 → A/O 一体化生化系统 → 沉淀 → 消毒

Nuclear Power Plant Wastewater Treatment 核电厂污水处理

核电厂污水处理

日处理能力

1,000 立方米/天

处理工艺流程：

处理工艺流程： → 预处理 → 超滤（UF → 反渗透（RO） → 离子交换 → 蒸发器

Waste Water Treatment System Of Landfill Site 垃圾填埋场污水处理系统

垃圾填埋场污水处理系统

日处理能力

日处理能力：400 立方米/天

处理工艺流程：

调节池 → 处理工艺流程： → 调节池 → 厌氧反应器 → 两级 A/O-MBR（膜生物反应器）→ 反渗透（RO） → 反渗透（RO）

Wastewater Treatment System In Semiconductor Industry 半导体行业废水处理系统

半导体行业废水处理系统

日处理能力

800 立方米/天

处理工艺流程：

调节池 → 处理工艺流程： → A2/O (Anaerobic-Anoxic-Oxic) Process → 调节池 → pH 中和池 → A²/O → （厌氧-缺氧-好氧）工艺 → 二沉池 → 排放调节池 → 达标外排

Poultry Breeding Wastewater Treatment System 家禽养殖污水处理系统

家禽养殖污水处理系统

日处理能力

2,000 立方米/天

处理工艺流程：

粗格栅 → 处理工艺流程： → 调节池 → 粗格栅 → 固液分离 → → 调节池 → UASB（上流式厌氧污泥床）→ A²/O（厌氧-缺氧-好氧）→ → 深度除磷 → 消毒 → 消毒

Industrial High-salt Wastewater Treatment System 工业高盐废水处理系统 日处理能力：

工业高盐废水处理系统 日处理能力：

日处理能力

550 立方米/天

处理工艺流程：

Coagulation & Sedimentation → 处理工艺流程： 混凝沉淀 → A²/O（厌氧-缺氧-好氧）→ → 调节池 → UASB（上流式厌氧污泥床）→ A²/O（厌氧-缺氧-好氧）→ → DTRO（盘管式反渗透） → 蒸发结晶

WAGO

shape 中国江苏省靖江市季市镇江坝路八百八十八号，邮编二一四五零零

Stress Analysis & Pipe Support Design

Stress Analysis of the skid and interconnecting piping including modifications required. Scope also included piping support selection and design.

Key Features

  • Project Title: 3000 m3/d Oily Water treatment Unit
  • End User: CNOOC MOC IDC TAPO (CMIT)
  • Plant Location: Iraq
  • Project Duration: 6 weeks

Design of Muhallah Pumping Station

Civil, Electrical, Mechanical and Piping design of the pumping station. Scope included foundation drawings, electrical cable schedule, pump datasheets, 3d modeling, GA drawings and isometrics among other deliverables

Key Features

  • Project Title: Rehabilitation of Muhalla Pumping Station
  • End User: Basrah Gas Company
  • Plant Location: Basrah - Iraq
  • Project Duration: 8 weeks

Stress Analysis of HP Steam Boiler and Turbine Piping

Stress Analysis of High Pressure Steam Boiler and Turbine piping. Scope included performing stress analysis as per B31.1, recommending changes in piping routing, support selection, spring support datasheets, stress isometrics, & final report.

Key Features

  • Project Title: 43MW Cogeneration Power Plant
  • End User: Hunza Steel Pvt Ltd.
  • Plant Location: Hunza, Pakistan
  • Project Duration: 4 weeks

Mechanical Design of DNV Baskets

Mechanical Design of SS & LTCS Progen Vessels. Scope included calculations as per ASME Sec VIII Div 1, GA, and fabrication drawings.

Key Features:

  • Project Title: Design & Supply of 10ton & 20ton DNV Baskets
  • End User: Technos
  • Plant Location: UAE
  • Project Duration: 5 weeks

Engineering Design of MEG Package

Mechanical, Structural, E&I, & Piping Design of MEG Package. Scope included mechanical design calculations and drawings, 3d modeling, GA drawings, isometrics, Stress analysis as per B31.3, & Structural design and drawings.
  • Project Title: Design & Supply of MEG Package
  • End User: Dubai Petroleum
  • Plant Location: UAE
  • Project Duration: 16 weeks

Engineering Design of Gathering Manifold Skid

Piping, Structural, & Instrumentation Design of Gathering Manifold Skid. Scope included 3d modeling, stress analysis, GA drawings, isometrics, structural calculation and drawings, cable schedule and layouts.
  • Project Title: HKN SARSANG Block-Well Site Based Production Facility
  • End User: HKN Energy Ltd.
  • Plant Location: Kurdistan, Iraq
  • Project Duration: 16 weeks

ENGINEERING, PROCUREMENT AND FABRICATION OF 25 SET OF EXCHANGERS

Engineering including mechanical design and drawings, procurement of material, fabrication, inspection and testing as per ASME code.
  • PROJECT DURATION : 4 MONTHS
  • PROJECT LOCATION: NIGERIA